Simply put, traditional Chinese medicine extraction equipment is the use of extraction equipment to extract the essence of traditional Chinese medicine. The components of traditional Chinese medicine extraction equipment can be divided into extraction tank, condenser, cooler, separator, filter, and pneumatic control system of the slag door. It can be designed and manufactured according to the different needs of users. Beijing Rena Xubang has the latest R&D and production in the field of Chinese medicine extraction equipment. For more detailed information on Chinese medicine extraction equipment, please refer to the reference materials below the article. Chinese medicine extraction equipment is widely used in Chinese medicine, Normal pressure, pressurization, decompression, extraction, warm immersion, heat reflux, forced circulation, percolation, separation of aromatic oils and recovery of organic solvents in plant, food, biological, and light chemical industries.
The extraction tank is a multi-purpose equipment designed for the boiling and extraction process of a Chinese medicine factory. In this process, it can extract, recover alcohol, and separate volatile oil. In addition to the main equipment of the extraction tank, this equipment is also equipped with a foam trap, a cooler, and an oil-water separator. All of these equipments are made of stainless steel where they come into contact with drugs. The heating interlayer has been strictly tested by the Wenzhou Pressure Vessel Inspection Department to be safe and reliable, and the equipment has a long service life. In the extraction process, this equipment is composed of condenser, oil-water separator, etc., and is completed in a completely sealed and recirculating system, and at the same time, the organic solvent is recovered from the waste residue.
Condenser (Condenser) The components of the air-conditioning system can transfer the heat in the pipe to the air near the pipe in a very fast manner. The condenser on most cars is installed in front of the water tank. A device that converts gas or vapor into liquid. Power plants use many condensers to condense the steam discharged from the turbine; in refrigeration plants, condensers are used to condense refrigerating steam such as ammonia and freon. In the petrochemical industry, condensers are used to condense hydrocarbons and other chemical vapors. In the distillation process, the device that converts vapor to liquid is called a condenser. All condensers operate by taking away the heat of gas or steam.
Coolers are a type of heat exchange equipment used to cool fluids. Water or air is usually used as a coolant to remove heat. There are partition coolers, spray coolers, jacket coolers and coil coolers. It is widely used in high-power silicon rectifiers and large electrical equipment such as induction furnaces and intermediate frequency furnaces as the cooling device of pure water, water air, oil water, oil air cooling and protection of auxiliary machines.
For the separator to maintain a good separation effect, its liquid level and pressure need to be controlled. The traditional separator liquid level and pressure control adopt constant pressure control technology. In the variable pressure liquid level control of the separator, the float liquid level controller is used to drive the oil and gas control valves to make them work together to control the liquid volume of crude oil and natural gas, and complete the adjustment of the liquid level in the separator without affecting the separator. The pressure is controlled. The variable pressure liquid level control method can minimize the throttling of the oil and gas outlet valve, reduce the pressure of the separator, and improve the separation effect. Oil-gas separators and oil-gas-water three-phase separators are widely used in oilfield transfer stations and joint stations. For the separator to maintain a good separation effect, its liquid level and pressure need to be controlled.
The filter is an indispensable device on the pipeline of the conveying medium. It is usually installed at the inlet side of the pressure reducing valve, pressure relief valve, fixed water level valve, Fanggong filter and other equipment. After the filter has a filter cartridge with a certain filter screen, its impurities are blocked. When it is necessary to clean, just take out the detachable filter cartridge and reinstall it after treatment. Therefore, it is extremely convenient to use and maintain.
The above is the main part of the extraction equipment.